RG59 Siamese Cable 100m
Model: SF-CABLE-SIAMESE
RG59 + 2×18AWG power composite cable, 100m roll for analog/HD-TVI runs.
🧵 Cables & Connectors
RG59 siamese, Cat5e/Cat6, BNC twist-ons, DC plugs and UTP baluns — the wiring backbone of any install.
The right cable decides whether your footage is clean or noisy. IP cameras run on Cat5e/Cat6 with PoE to 100m; analog, TVI, CVI and AHD cameras use RG59 siamese coax with 18AWG power in the same jacket. We stock bulk boxes, BNC twist-ons, DC plugs and UTP baluns so a single pull wires power and video together.
Model: SF-CABLE-SIAMESE
RG59 + 2×18AWG power composite cable, 100m roll for analog/HD-TVI runs.
Model: SF-CABLE-CAT6
305m box of Cat6 UTP for IP camera and PoE network backbone.
Model: SF-BNC-10
10 nickel-plated BNC twist-on connectors for coax camera ends.
Model: SF-DC-10
10 pairs of 5.5×2.1mm DC power plugs (male + female) for 12V cameras.
Model: SF-BALUN-PAIR
Passive BNC-to-RJ45 baluns to run analog video over Cat5e/Cat6.
Model: SF-DC-SPLIT4
Splits one 12V adapter to feed four cameras from a single supply.
Model: SF-GLANDS-10
Seal cable entries on housings and junction boxes against water and dust.
Model: SF-VIDEO-ISO
BNC ground-loop isolator that removes snow and rolling bars on analog video.
For a new IP camera system, Cat6 with PoE is simplest — one cable carries power and data. Keep RG59 siamese for existing analog or HD-over-coax cameras.
Keep Cat6 PoE runs under 100m for full speed and power. Beyond that use a long-range PoE switch, a 5.8GHz wireless bridge, or fiber.
Practical guides that use these cables & connectors:
Conversations may be saved to improve our support. No personal data required.