12V 2A Power Supply
Model: SF-PS-12V2A
12V 2A adapter for a single camera or small device.
Power
Model: SF-PS-WATER
IP67 outdoor 12V adapter for cameras without local shelter.
💬 WeChat: 13924664587 — add us for fast quotes & product photos.
802.3af/at PoE, RJ45, BNC, DC 12V/24V — works with Hikvision, Dahua, Axis & more.
Covered against manufacturing defects. RMA & replacement via support.
Local / NVR storage by design. No cloud subscription required.
Integrates with standard VMS/NVR ecosystems — no vendor lock-in.
Dispatched globally with regional carriers.
Direct line for quotes, specs and install photos.
| Output | 12V 2A |
| Ingress | IP67 |
| Use | Outdoor |
| Plug | 5.5 × 2.1mm |
| Model | SF-PS-WATER |
| Brand | SurveilForge (independent) |
An IP67 waterproof 12V 2A supply built for outdoor camera poles and housings without shelter. Sealed, weatherproof and surge-protected, it keeps a single camera powered through rain and heat.
Yes. SurveilForge accessories use open surveillance standards — IEEE 802.3af/at PoE, RJ45, BNC, and DC 12V/24V — so they work with any camera brand that follows those standards, including Hikvision, Dahua, Axis, Reolink and others. We are an independent brand, not affiliated with any camera OEM.
Yes. We ship worldwide; lead time and carrier depend on the destination and order size.
Standard products are available as single units in the shop. OEM or custom-branded orders start at a minimum of 300 pieces.
All products carry a 12-month warranty against manufacturing defects. Contact our support team for RMA and replacement.
Be the first to review this product
Verified buyers help other installers choose the right gear. Share your setup and we'll feature it here.
⏱ Takes about a minute · published within 1–2 business days.
Model: SF-PS-12V2A
12V 2A adapter for a single camera or small device.
Model: SF-PS-12V10A
Central 18-channel 12V distribution box for multi-camera sites.
Model: SF-SURGE-2IN1
Protects camera power and video/signal lines from lightning and surges.
Model: SF-PS-12V5A
12V 5A (60W) adapter to power 2–3 cameras from one outlet.
Planning, sizing and install tips that use this product:

Run a camera where there is no socket: PoE switches, single-port injectors and 12V distribution boxes explained with product links.

12V vs 24V for CCTV: 12V is standard for short runs; 24V tolerates longer cable with less drop. Size a box by total watts, not ports.

Install an outdoor camera in 5 steps: pick height and angle, mount the bracket, route and seal cable, power via PoE, and add a rain cover.

IP66 resists driving rain and dust (enough for any wall camera); IP67 adds short immersion for low-mounted gear. A rated camera is only as sealed as its cable entry.

Farms have no walls, few sockets and often no broadband. Solar 4G cameras and wireless bridges cover gates, paddocks and yards without trenching.

Mount under eaves, use a junction box, seal the cable, protect from surges, then aim and test. Six steps to a camera that survives weather.
Conversations may be saved to improve our support. No personal data required.