SFP Module 1.25G Single-Mode 20km (LC)
Model: SF-SFP-1G-20
Hot-pluggable 1.25G single-mode SFP, LC duplex, 20km reach for media converters and fiber switches.
Fiber & Long-Range
Model: SF-FMC-1G
Converts one Cat6 run to single-mode fiber — extend a camera link to 20km with zero signal loss.
💬 WeChat: 13924664587 — add us for fast quotes & product photos.
802.3af/at PoE, RJ45, BNC, DC 12V/24V — works with Hikvision, Dahua, Axis & more.
Covered against manufacturing defects. RMA & replacement via support.
Local / NVR storage by design. No cloud subscription required.
Integrates with standard VMS/NVR ecosystems — no vendor lock-in.
Dispatched globally with regional carriers.
Direct line for quotes, specs and install photos.
| Copper Port | 1 × 10/100/1000 Mbps RJ45 |
| Fiber Port | 1 × SFP slot (1.25G) |
| Max Distance | 20km (with 20km SFP module) |
| Fiber Type | Single-mode (9/125µm) |
| Optical Connector | LC / SC (module dependent) |
| Latency | < 2 µs |
| Housing | Metal, fanless, DIN-rail ready |
| Power | 5V/1A adapter (included) |
| Certifications | CE / FCC / RoHS |
| Model | SF-FMC-1G |
| Brand | SurveilForge (independent) |
A plug-and-play gigabit fiber media converter that turns a standard RJ45 camera link into a long-haul single-mode fiber run. Drop in any 1.25G SFP module and run CAT5e/6 from the camera to the converter, then push the signal up to 20km over a single fiber strand — ideal for parking lots, campuses, highways and any site where copper would never reach. No software, no configuration: power it, plug the fiber and the link is live. The metal case mounts on a wall or DIN rail and runs silently in a comms closet or pole enclosure.
The converter has an SFP slot but ships without a module. Add our SF-SFP-1G-20 single-mode module for a 20km link, or any standard 1.25G SFP if your distance is shorter.
Yes. It is transparent Layer-2 — plug the RJ45 side into your switch/NVR uplink or camera and the fiber side into the remote converter. No brand lock-in; works with Hikvision, Dahua, Uniview or any standard IP gear.
Yes. SurveilForge accessories use open surveillance standards — IEEE 802.3af/at PoE, RJ45, BNC, and DC 12V/24V — so they work with any camera brand that follows those standards, including Hikvision, Dahua, Axis, Reolink and others. We are an independent brand, not affiliated with any camera OEM.
Yes. We ship worldwide; lead time and carrier depend on the destination and order size.
Standard products are available as single units in the shop. OEM or custom-branded orders start at a minimum of 300 pieces.
All products carry a 12-month warranty against manufacturing defects. Contact our support team for RMA and replacement.
Be the first to review this product
Verified buyers help other installers choose the right gear. Share your setup and we'll feature it here.
⏱ Takes about a minute · published within 1–2 business days.
Model: SF-SFP-1G-20
Hot-pluggable 1.25G single-mode SFP, LC duplex, 20km reach for media converters and fiber switches.
Model: SF-FPC-SM-3
OS2 single-mode jumper, duplex LC to SC, 3m — for patching converters, modules and panels.
Model: SF-FRK-2
19" rack chassis that powers and centralizes up to 2 media converters at the NVR head-end.
Planning, sizing and install tips that use this product:

Extend PoE beyond 100m with midspan extenders, a long-range CCTV-mode switch, or fiber — and know which to pick by distance.

Fiber vs Ethernet for CCTV: use Cat6 under 100m, fiber for campus-scale or EMI-heavy backbones. A media converter bridges the two cheaply.
Conversations may be saved to improve our support. No personal data required.