4-Port PoE Switch (802.3af)
Model: SF-POE-4P-AF
Compact 4-port 10/100 PoE switch, 48V, powers up to 4 IP cameras.
PoE Networking
Model: SF-POE-8P-OUT
IP66 outdoor PoE switch with surge protection for perimeter and parking camera runs.
💬 WeChat: 13924664587 — add us for fast quotes & product photos.
802.3af/at PoE, RJ45, BNC, DC 12V/24V — works with Hikvision, Dahua, Axis & more.
Covered against manufacturing defects. RMA & replacement via support.
Local / NVR storage by design. No cloud subscription required.
Integrates with standard VMS/NVR ecosystems — no vendor lock-in.
Dispatched globally with regional carriers.
Direct line for quotes, specs and install photos.
| Ports | 8 × PoE + 1 × uplink |
| Standard | IEEE 802.3at |
| Ingress | IP66 |
| Surge | 6kV protection |
| Temp | -30°C to 65°C |
| Mount | Pole / wall |
| Model | SF-POE-8P-OUT |
| Brand | SurveilForge (independent) |
An IP66-rated outdoor PoE switch designed for harsh environments — parking lots, building perimeters and rural sites. Built-in 6kV surge protection and a wide operating temperature range keep cameras online through heat, rain and dust. Eight 802.3at ports plus an uplink, mountable on a pole or wall.
Yes. SurveilForge accessories use open surveillance standards — IEEE 802.3af/at PoE, RJ45, BNC, and DC 12V/24V — so they work with any camera brand that follows those standards, including Hikvision, Dahua, Axis, Reolink and others. We are an independent brand, not affiliated with any camera OEM.
Yes. We ship worldwide; lead time and carrier depend on the destination and order size.
Standard products are available as single units in the shop. OEM or custom-branded orders start at a minimum of 300 pieces.
All products carry a 12-month warranty against manufacturing defects. Contact our support team for RMA and replacement.
Be the first to review this product
Verified buyers help other installers choose the right gear. Share your setup and we'll feature it here.
⏱ Takes about a minute · published within 1–2 business days.
Model: SF-POE-4P-AF
Compact 4-port 10/100 PoE switch, 48V, powers up to 4 IP cameras.
Model: SF-POE-8P-AT
8-port 10/100 PoE switch, 48V, up to 30W per port for PTZ and high-power cameras.
Model: SF-POE-16P
16-port 10/100 PoE switch for mid-size multi-camera deployments.
Model: SF-POE-24P
24-port gigabit PoE switch for campus and enterprise surveillance backbones.
Planning, sizing and install tips that use this product:

Run a camera where there is no socket: PoE switches, single-port injectors and 12V distribution boxes explained with product links.

Temporary construction-site CCTV: IP66 outdoor PoE switches, wireless bridges to skip trenching, and cages that survive a rough site.

Install an outdoor camera in 5 steps: pick height and angle, mount the bracket, route and seal cable, power via PoE, and add a rain cover.

IP66 resists driving rain and dust (enough for any wall camera); IP67 adds short immersion for low-mounted gear. A rated camera is only as sealed as its cable entry.

Farms have no walls, few sockets and often no broadband. Solar 4G cameras and wireless bridges cover gates, paddocks and yards without trenching.
Conversations may be saved to improve our support. No personal data required.